Cura Fundamentals

Are you interested in learning 👩‍🏫 about the fascinating world of 🖨️ 3D printing? 👀 Look no further than FundedYouth’s latest offering – a comprehensive fundamentals course that covers everything from importing files into Cura to printer operation. Whether you’re a complete beginner 🙀 or someone looking to enhance your knowledge 👩‍🎓, this course has got you covered. With an emphasis on practicality 👋 and applicable instructions for any FDM printer out there, you’ll soon be creating your own masterpieces in no time. Plus, by enrolling in the course, you’ll become a part of our growing community of makers and innovators. Don’t miss out on this opportunity to unlock your creativity and join the 3D printing revolution. Enroll now and let’s get started!Check out Funded Youth’s latest offering: a comprehensive fundamentals course on 3D printing! Whether you’re a complete beginner or looking to enhance your knowledge, this course has got you covered. Learn everything from importing files into Cura, slicing, using supports, to file preparation. While the course highlights the Sovol SV06 Plus printer, rest assured, the instructions are applicable to any FDM printer out there. With an emphasis on practicality, you’ll navigate through software handling to printer operation seamlessly. Join us and embark on a journey to unlock the world of 3D printing. Enroll now and become a part of our growing community of makers and innovators!

Watch the Full Series on YouTube

Table of Contents

Install Cura on Windows

https://www.youtube.com/watch?v=yuiVKoqeusE

Install Cura on Mac

https://www.youtube.com/watch?v=s1MvsKdjqXM

Install Cura on Linux

https://www.youtube.com/watch?v=q3JEqS5mk1k

Setup a Default Dummy Printer

https://www.youtube.com/watch?v=3qtLfEh6u9M

Add a Custom Profile to Cura (Sovol SV06 Plus Profile)

https://www.youtube.com/watch?v=FBn3lYanPLM

Change Material Print Temperature

https://www.youtube.com/watch?v=caheEGon8J4

Where to obtain 3D Ready Print Files

https://www.youtube.com/watch?v=XhT6MOsiQiA

Slicing Your First 3D Object in Cura

https://www.youtube.com/watch?v=MwXOYiLUJ1s

Adding Supports in Cura

https://www.youtube.com/watch?v=fEJHicABHs4

Understanding Infills and Walls in Cura

https://www.youtube.com/watch?v=_l72sNs01rw

3D Printing using a MicroSD Car

https://www.youtube.com/watch?v=J4cpSc0T9n4